什么是BzMiner ，如何使用BzMiner 挖矿的操作方方法和教程

bzminer -w 0x0000000000000000000000000000000000000000 -p ethstratum+tcp://eth.geodns.flexpool.io:4444 -r worker_name

bzminer -w 0x0000000000000000000000000000000000000000 -p ethstratum+tcp://eth.geodns.flexpool.io:4444 stratum+tcp://usw-eth.hiveon.net:4444 -r worker_name

bzminer -c eth-config.txt

bzminer -a ethash -w 0x0000000000000000000000000000000000000000 -p stratum+tcp://usw-eth.hiveon.net:4444 stratum+tcp://us1.ethermine.org:4444 -r worker_name

bzminer -a etchash -w 0x0000000000000000000000000000000000000000 -p stratum+tcp://us1-etc.ethermine.org:4444 stratum+tcp://eu1-etc.ethermine.org:4444 -r worker_name

bzminer -a kawpow -w 0x0000000000000000000000000000000000000000 -p stratum+ssl://stratum-ravencoin.flypool.org:3443 -r worker_name

bzminer -a olhash -w 0x0000000000000000000000000000000000000000 -p ethproxy+ssl://us.extremehash.net:3443 ethproxy+ssl://eu-ol.extremehash.net:3443 -r worker_name

bzminer -a alph -w 000000 -p stratum+tcp://eu.metapool.tech:20032 alphstratum+tcp://185.71.66.100:10159

bzminer -a kaspa -w 000000 -p node+tcp://127.0.0.1:16110

bzminer -a kaspa -w 000000 -p stratum+tcp://pool.us.woolypooly.com:3112

bzminer -a ixi -w 000000 -p http://ixian.changeling.biz:8081

bzminer -a woodcoin -w 0000 -p stratum+tcp://dragonpool.vip:5233 --pool_password c=LOG,d=1,ID=rig_name

bzminer -a ethash -w 000000 -p stratum+tcp://us1.ethermine.org:4444 --a2 alph --w2 000000 --p2 stratum+tcp://eu.metapool.tech:20032

>bzminer -h
BzMiner - Advanced Crypto Miner
Usage: bzminer [OPTIONS]

Options:
  -h,--help                   Print this help message and exit
  --version                   Get the version of this binary
  -a TEXT                     Default Mining algorithm. eg. 'ethash'
  --a2 TEXT                   Default second Mining algorithm (dual mine). eg. 'ethash'
  -r TEXT                     Default Rig (worker/username) name. eg. 'Rig'
  --r2 TEXT                   Default Pool username for second algo (dual mine)
  --pool_password TEXT        Default Pool password
  --pool_password2 TEXT       Default Pool password for second algo (dual mine)
  --nvidia INT                Only mine with Nvidia devices (0 = false, 1 = true)
  --amd INT                   Only mine with AMD devices (0 = false, 1 = true)
  --disable_opencl            Disable OpenCL. Useful for BzMiner crashing during startup due to AMD drivers.
  -w TEXT ...                 Wallet Address. If algorithm requires more than one address, list them same as -p
  --w2 TEXT ...               Wallet Address for second algo (dual mine). If algorithm requires more than one address, list them same as -p
  -p TEXT ...                 Array of Pool Addresses. eg. stratum+tcp://us1.ethermine.org:4444  stratum+tcp://us2.ethermine.org:4444
  --p2 TEXT ...               Array of Pool Addresses for second algo (dual mine). eg. stratum+tcp://us1.ethermine.org:4444  stratum+tcp://us2.ethermine.org:4444
  -v INT                      Set log verbosity. 0 = Error, 1 = warn, 2 = info 3 = debug, 4 = network
  --hide_disabled_devices     Do not log devices that are disabled.
  --max_log_history INT       For http api. max retained log history. default is 1024. Higher values increase memory usage.
  --log_solutions INT         If 1 (default 1), Solutions will be logged in output (as green).
  --log_date INT              If 1 (default 0), the current date/time will be logged at the start of every line of output.
  -o TEXT                     If provided, output will be logged to this file
  --log_file_verbosity INT    Set log file verbosity. Default 2.
  --clear_log_file INT        If 1 (default 0), BzMiner will overwrite the log file on start.
  -c TEXT                     Config file to load settings from. Default is config.txt
  -i INT                      Set mining intensity (0 - 64). 0 = auto. Higher means more gpu spends more time hashing. Default is 0.
  --i1 INT                    Set mining intensity (0 - 64). 0 = auto. Higher means more gpu spends more time hashing. Default is 0.
  --i2 INT                    Set mining intensity for second algo (dual mine) (0 - 64). 0 = auto. Higher means more gpu spends more time hashing. Default is 0.
  --lhr_stability INT ...     Set the LHR Unlock Stability value for each device. Lower is more stable, higher is less stable and higher hashrate. Default is 100.
  --lhr_exception_reboot      Reboot the pc when an LHR exception happens on a device (device hard reset currently requires pc reboot).
  -g INT                      Ramp up miner rather than start at full speed.
  -b INT                      Cooldown period. 0 = disabled. Higher value means longer time between cooldown periods. default is 0
  --nc INT                    Do not save to the config file (but still read from it).
  --update_frequency_ms INT   Output frequency in milliseconds. 0 = disabled. Default is 15000.
  --update_frequency_shares INT
                              Output frequency based on new shares found. 0 = disabled. Does not replace update_frequency_ms, works in parallel. set update_frequency_ms to 0 if you only want to use update_frequency_shares. Default is 0.
  --avg_hr_ms INT             Hashrate averaging window. Longer is more stable hashrate reporting. Default is 30000.
  --extra_dev_fee FLOAT       Add a little extra time for dev fee (percentage). Adds to default dev fee. Default 0.0
  --cpu_validate INT          Validate solutions on cpu before sending to pool.
  --multi_mine_ms INT ...     Time (ms) to mine each algo when dual mining.
  --multi_mine_type INT ...   Multi mine type. 0 = parallel, 1 = alternating (can oc per algo), 2 = mine only during DAG generation. default = 0
  --max_dual_autotune_drop FLOAT
                              Max hashrate drop of first algo in dual mining when autotuning. 0.0 - 1.0. default 0.92.
  --cache_dag INT             Useful for eth + zil. 0 = disabled (default), 1 = dag cached in vram (only supported on >6gb cards)
  --zil_only                  Only mine zil for the first algo (for zil + non-eth algo). Will set for first pool_config. Will only generate a dag for epoch 0 (zil). use in combination with --multi_mine_type 1, --multi_mine_ms 0 10000 and cache_dag 1
  --force_algo TEXT           Force an algorithm to run. Useful for OS's that do not currently have the desired algo implemented in integration scripts
  --blockchain_fee BOOLEAN    Enable/Disable 2% kaspa dev fund. 0 = disable, 1 = enable. Default = 0
  --algo_opt INT ...          A list (one per device) of whether to use algorithm optimizations if the algo supports it.
  --test INT                  Test mine. Useful for setting up overclocks.
  --http_enabled INT          Enable or disable HTTP API. 0 = disabled, 1 = enabled Default is enabled.
  --http_address TEXT         Set IP address for HTTP API to listen on. Default is 0.0.0.0.
  --http_port INT             Set which port the HTTP API listens on. default is 4014.
  --http_password TEXT        Set password for HTTP API. If not set, HTTP API will not be enabled. default is empty.
  --force_opencl INT          Force all devices to use the OpenCL implementation (if possible).
  --reset_oc_dag_gen INT      Reset overclocks before dag generation. Clocks will be set back after dag is generated. 1 = enabled, 0 = disabled
  --devices                   Only log devices. Does not start miner
  --no_watchdog               Do not start watchdog service.
  --disable TEXT ...          Disable specific GPUs from mining, separate by a space. Use device id in the format of pci_bus:pci_device (eg. --disable 1:0 3:0). use --devices to find device id.
  --advanced_config INT       If 1 (default 0), advanced config options will be showin in config.txt.
  --start_script TEXT         If specified, this script will run when BzMiner starts.
  --hung_gpu_ms INT           When GPU does not respond for this amount of time (ms), will be considered hung.
  --crash_script TEXT         When hung GPU is detected, this script will run.
  --hung_gpu_reboot INT       If 1 (default 0), BzMiner will reboot the rig when a hung GPU is detected.
  --hung_gpu_restart_bzminer INT
                              If 1 (default 1), and watchdog is enabled, watchdog will restart BzMiner process when hung GPU is detected.
  --reboot_after_watchdog_restarts INT
                              Reboot PC after watchdog restarts x number of times
  --restart_miner_minutes INT If specified and greater than 0, BzMiner watchdog will restart BzMiner process after this amount of time (minutes).
  --reboot_minutes INT        If specified and greater than 0, BzMiner will reboot the rig after this amount of time (minutes).
  --no_color INT              If 1 (default 0), output in console will not have color.
  --oc_delay_ms INT           Time (ms) to delay algo switch before/after oc changed for algo.
  --oc_fan_speed TEXT ...     Set the target fan speed (as percentage) for devices, separated by a space. 0 = auto, -1 = ignore, 100 = max.
                              Optionally use target temperature format, eg. --oc_fan_speed t:N[fMin-fMax]
                              where t is core, tm is mem , N is target temp, fMin is min fan speed percent, fMax is max fan speed percent
                              eg. --oc_fan_speed t:65[25-75] tm:85[50-100]
  --oc_power_limit INT ...    Set the power limite for devices (in watts), separated by a space. 0 = ignore.
  --oc_core_clock_offset INT ...
                              Set the target core clock offset (in mhz) for devices, separated by a space. 0 = ignore. Will be ignored if oc_lock_core_clock is not 0.
  --oc_memory_clock_offset INT ...
                              Set the target memory clock offset (in mhz) for devices, separated by a space. 0 = ignore. Will be ignored if oc_lock_memory_clock is not 0.
  --oc_lock_core_clock INT ...
                              Lock the core clock for devices (in mhz), separated by a space. Overrides oc_core_clock.
  --oc_lock_memory_clock INT ...
                              Lock the memory clock for devices (in mhz), separated by a space. Overrides oc_memory_clock.
  --oc_mem_tweak INT          gddr5x memory tweak. 0-4, 0 = disabled, 1-4 = timing, higher = faster. May need to reduce overclocks.
  --oc_unlock_clocks          Unlock the core and memory clocks. Will not mine (same as --devices argument).
  --oc_reset_all              Completely reset oc on all devices. Requires admin/root

{
    "pool_configs": [{
            "algorithm": "ethash", // pool algorithm

            "wallet": "0x0000000000000000000000000000000000000000", // wallet to mine to

            "url": ["stratum+tcp://yourpool:4444", "stratum+tcp://yourpool:4444"], // list of urls to connect to. will rotate through urls if they fail

            "username": "rig", // username/worker name to use

            "lhr_only": false, // if true only lhr cards will mine to this pool

            "delay_before_connection_retry": 3000, // milliseconds between each reconnection retry (minimum is 1 second)

            "no_work_timeout": 30000, // ms after connection begins before no work timeout is triggered and reconnection happens

            "test": false, // run this algo in test mode (will not connect to a pool)

            "test_iteration_ms": 15000 //  seconds between new work in test mode

            "blockchain_fee": true, // whether to enable the blockchain dev team fee (enabled by default, currently only available for kaspa)

            "tbs_watchdog": 1000, // If time since last share is over this percentage of estimated tbs, tbs watchdog triggers

            "algo_opt": 0, // If algorithm supports it (woodcoin), can set algo_opt to values that change how algorithm runs

            "zil_only": false, // If the algo is Eth + zil, will only allocate dag for zil, and ignore eth mining. for dual mining zil + another algo

            "max_dual_autotune_drop": 0.92 // max alowable drop for dual autotune (eg. 0.92 ~ 92% lowest eth hashrate)
        },
        {
            "algorithm": "kawpow", // pool algorithm

            "wallet": "0x0000000000000000000000000000000000000000", // wallet to mine to

            "url": ["stratum+tcp://yourpool:4444", "stratum+tcp://yourpool:4444"], // list of urls to connect to. will rotate through urls if they fail

            "username": "rig", // username/worker name to use

            "lhr_only": false, // if true only lhr cards will mine to this pool

            "delay_before_connection_retry": 3000, // milliseconds between each reconnection retry (minimum is 1 second)

            "no_work_timeout": 30000, // ms after connection begins before no work timeout is triggered and reconnection happens

            "test": false, // run this algo in test mode (will not connect to a pool)

            "test_iteration_ms": 15000 //  seconds between new work in test mode

            "blockchain_fee": true, // whether to enable the blockchain dev team fee (enabled by default, currently only available for kaspa)

            "tbs_watchdog": 1000, // If time since last share is over this percentage of estimated tbs, tbs watchdog triggers

            "algo_opt": 0, // If algorithm supports it (woodcoin), can set algo_opt to values that change how algorithm runs

            "zil_only": false // If the algo is Eth + zil, will only allocate dag for zil, and ignore eth mining. for dual mining zil + another algo

            "max_dual_autotune_drop": 0.92 // max alowable drop for dual autotune (eg. 0.92 ~ 92% lowest eth hashrate)
        }],

    "pool": [0,1], // one or more pools to mine to. devices that do not specify will mine to these pools (these are indices into the pool_config list)

    "intensity": [0], // set mining intensity for device. 0-64, 0 = auto

    "repair_dag": [true], // Whether the dag (currently only ethash and etchash) should be repaired if an issue occurs. Useful for extreme overclocking. this has an impact on dag generation time

    "calc_dag_crc": [false], // Whether to calculate the dag crc. this will have an impact on dag generation time.

    "ramp_up": [false], // Starts mining at a slower speed and slowly ramps up to full mining speed

    "cooldown_period": [0], // Allows the GPU to cool down after some time. 0 = off, default = 0, higher values means longer intervals between cooldowns

    "cpu_validate": [false], // Whether solutions from this device should be validated on the CPU before sent to pool

    "reset_oc_dag_gen": [false], // If true, will reset overclocks before dag is generated. after dag is generated, will set overclocks back to what they currently are. Useful for very high OC

    "multi_mine_ms": [5000, 15000], // how long each algo should mine when dual mining

    "multi_mine_type": 1, // 0 = parallel mine, 1 = alternate mine (can oc per algo), 2 = DAG gen only mining

    "temp_start": 80, // temperature (C) that device should start mining at after it has stopped due to temp_stop

    "temp_stop": 120, // temperature (C) that device should stop mining at

    "rig_name": "rig", // default name of rig, if pool does not specify, will use this as the username/worker name

    "log_file": "", // if not empty, the file logs should be written to

    "clear_log_file": false, // by default, the log file will not be cleared when bzminer starts. set this to true to clear the log file when bzminer starts

    "nvidia_only": false, // only mine using nvidia cards

    "amd_only": false, // only mine using amd cards

    "disable_opencl ": false, // do not load OpenCL. Useful for some rigs that are having AMD driver issues

    "lhr_stability": [100], // adjustment for lhr unlock for each card. Lower values = higher stability, higher values = lower stability

    "lhr_exception_reboot": false, // if set to true, will reboot the pc if the LHR exception is triggered (which requires a hard device reset)

    "lock_config": false, // if true, bzminer will never write to this file

    "extra_dev_fee": 0.0, // additional percentage to add to dev fee (thanks for your support!)

    "cache_dag": 0, // when running eth + zil, if set to 1 eth dag will be cached while mining zil, so dag does not need to be recalculated after zil session

    "advanced_config": true, // show advanced config options (after setting true, must run bzminer once so it can update this file)

    "advanced_display_config": true, // show advanced display options (after changing, must run bzminer once so it can update this file)

    "launch_on_boot": false, // if true, will automatically launch bzminer when pc turns on (windows only)

    "start_script": "start.bat", // Optional script to run when bzminer starts up

    "hung_gpu_ms": 30000, // After GPU is unresponsive for this number of milliseconds, it is considered "hung"

    "reboot_after_wathdog_restarts": 0, // reboot pc after watchdog restarts bzminer x number of times. default 0

    "crash_script": "crash.bat", // Optional script to call when a hung gpu is detected

    "hung_gpu_reboot": false, // If true, will reboot rig when a hung gpu is detected

    "hung_gpu_restart_bzminer": true, // If true, and watchdog is running, will restart bzminer when a hung gpu is detected

    "restart_miner_minutes": 0, // restart bzminer after this amount of time (minutes), IF watchdog is enabled

    "reboot_minutes": 0, // reboot pc after this amount of time (minutes)

    "no_color": false, // disable all color output

    "verbosity": 2, // log level (0 = errors only, 1 = warnings, 2 = info (default), 3 = debug, 4 = network, 5 = trace (not available in release)

    "log_file_verbosity": 2, // same as "verbosity" but for the log file

    "update_frequency_ms": 15000, // how often to log info (in milliseconds). set to 0 to disable

    "update_frequency_shares": 0, // how often to log info (in after x amount of shares). set to 0 to disable

    "avg_hr_ms": 30000, // time to average hashrate (ms). Higher time means more stable hashrate, lower time means more realtime

    "log_solutions": true,  // whether to log each solution found in the output

    "log_date": false, // whether to log the date on each log line

    "http_password": "", // password for http api

    "http_port": 4014, // port to use for http api

    "http_address": "0.0.0.0", // address to listen on for http api

    "http_enabled": true, // set to false to disable http api

    "disable_udp": false, // If true, the UDP service is disabled and this device will not show up in other instances of the BzMiner GUI

    "x_display": ":0", // which x display to use (for nvidia, linux only)

    "start_x": false, // attempt to start an x display (for nvidia, linux only)

    "display_settings": { // advanced display settings

        "table_width": 100, // number of characters wide the tables are. 0 = auto

        "wrap": true, // whether the table should allow columns to wrap (set to false to disable cells from wrapping their contents to the next line)

        "title_align": 1, // table title horrizontal alignment. 0 = left, 1 = center, 2 = right. default is 1 = center

        "date_align": 0, // table date alignment. 0 = left, 1 = center, 2 = right. default is 0 = left

        "max_log_history": 1024, // For http api. max retained log history. default is 1024. Higher values increase memory usage.

        "hide_unused_devices": false // if true, will hide any devices that are not mining (with start_mining: false setting)

        "show_devices": true, // show the devices table

        "devices_title_color": 7, // set the color of the devices table title

        "devices_border_color": 8, // set the color of the devices table border

        "devices_columns": "#,name:nw,free,total,core,mem,fan,pwr,temp", // which columns to show for devices table. supported list below

        "show_pool": true, // whether to show the pool tables

        "pool_title_color": 7, // pool table title color

        "pool_border_color": 8, // pool table border color

        "pool_columns": "#,uptime,a/r/i,avg,eff,pool mh,miner mh,status" // which columns to show in the pool tables
    },

    "oc_delay_ms": 50, // for dual mining only, time before/after oc is applied when switching to next algo
    "oc_fan_speed": [], // List (optionally of lists for dual mining oc's) of fan speeds (%)
    "oc_power_limit": [], // List (optionally of lists for dual mining oc's) of power limits (watts)
    "oc_core_clock_offset": [], // List (optionally of lists for dual mining oc's) of core offsets (mhz)
    "oc_memory_clock_offset": [], // List (optionally of lists for dual mining oc's) of memory offsets (mhz)
    "oc_lock_core_clock": [], // List (optionally of lists for dual mining oc's) of locked core clocks (mhz, overrides core offset when not 0)
    "oc_lock_memory_clock": [], // List (optionally of lists for dual mining oc's) of locked memory clocks (mhz, overrides memory offset when not 0)
    "oc_mem_tweak": 0, // Gddr5x memory timings tweak, levels 1-3. Higher tweak may require lower OC

    "device_overrides": [{
            // device info/settings
            "uid": "1:0", // pci bus id : pci device id. this uniquely identifies the device as long as it doesn't change pci slots

            "name": "EVGA RTX 3090 FTW3 Ultra", // name of the device

            "start_mining": true, // if false, device will not mine

            "lhr": false, // whether this device is an lhr card or not ( set automatically )

            "temp_start": 80, // temperature (C) that device should start mining at after it has stopped due to temp_stop

            "temp_stop": 120, // temperature (C) that device should stop mining at

            // pool settings for this device
            "pool": [0,1], // list of pools this device should mine to

            "intensity": [0], // mining intensity. 0-64, 0 = auto. higher values generally means higher hashrate, but higher chance of stales

            "repair_dag": [true],  // Whether the dag (currently only ethash and etchash) should be repaired if an issue occurs. Useful for extreme overclocking. this has an impact on dag generation time

            "calc_dag_crc": [false], // Whether to calculate the dag crc. this will have an impact on dag generation time.

            "ramp_up": [false], // Starts mining at a slower speed and slowly ramps up to full mining speed

            "cooldown_period": [0], // Allows the GPU to cool down after some time. 0 = off, default = 0, higher values means longer intervals between cooldowns

            "reset_oc_dag_gen": [false], // If true, will reset overclocks before dag is generated. after dag is generated, will set overclocks back to what they currently are. Useful for very high OC

            "force_opencl": [false], // force device to mine on OpenCL (if available, only affects nvidia)

            "dag_dev_ref": [""], // Instead of this device generating the dag, it can copy the dag from another device. Nvidia only currently. useful for high oc's

            // overclocking
            "oc_fan_speed": [-1], // set the devices fan speed. -1 = do not change, 0 = auto, >0 = lock at percentage. Optionally a list for dual mining

            "oc_power_limit": [0], // set the max power consumption (watts) the device will use. 0 = do not change, >0 = max watts. Optionally a list for dual mining

            "oc_core_clock_offset": [0], // set the core clock speed offset in MHz. 0 = do not change, !0 = set clock speed offset. Optionally a list for dual mining

            "oc_memory_clock_offset": [0], // set the memory clock speed offset in MHz. 0 = do not change, !0 = set memory speed offset. Optionally a list for dual mining

            "oc_lock_core_clock": [0], // Lock the core clock to a specific mhz, if device allows it. Optionally a list for dual mining

            "oc_lock_memory_clock": [0] // Lock the memory clock to a specific mhz, if device allows it. Optionally a list for dual mining
        }]
}

{
    "pool_configs": [{
            "algorithm": "ethash",
            "wallet": "0000",
            "url": ["stratum+tcp://us2.ethermine.org:4444"],
            "lhr_only": false,
            "max_dual_autotune_drop": 0.92
        }, {
            "algorithm": "alph",
            "wallet": "0000",
            "url": ["stratum+tcp://eu.metapool.tech:20032", "stratum+tcp://pool.woolypooly.com:3106"],
            "username": "alph_rig",
            "lhr_only": false,
            "max_dual_autotune_drop": 0.92
        }],
    "pool": [0, 1],
    "intensity": [0],
    "multi_mine_ms": [5000, 15000],
    "rig_name": "ethash_rig",
    "log_file": "",
    "clear_log_file": false,
    "nvidia_only": false,
    "amd_only": false,
    "lock_config": false,
    "advanced_config": false,
    "oc_delay_ms": 100,
    "device_overrides": [{
            "uid": "1:0",
            "name": "EVGA RTX 3090 FTW3 Ultra",
            "start_mining": true,
            "lhr_mine_ms": [5000, 15000],
            "oc_fan_speed": [-1],
            "oc_power_limit": [0],
            "oc_core_clock_offset": [-200, 50],
            "oc_memory_clock_offset": [1100, 0],
            "oc_lock_core_clock": [0],
            "oc_lock_memory_clock": [0, 810]
        }]
}